FAQ

PressuRITE can perform 3 or 4 functions depending on the model: Low, High, Oil and Condenser Fan Cycling.

Programming PressuRITE is simple and takes minutes with the Hand-Held Set-Up Tool.

PressuRITE is housed in a NEMA 1 enclosure. That means installation should be indoors OR it can be outdoors if protected from rain/snow by a roof or equipment shield.

Accuracy is +/- 1 psi for the range being sensed by PressuRITE.

The cost of PressuRITE is very comparable to the old-style mechanical pressure switches when all 3 functions are used… it may in fact be less costly.

Because it’s digital, PressuRITE is absolutely the BEST way to sense and control pressure that there is: always accurate & always consistent… not susceptible to environmental conditions.

You must always ‘Query’ a PressuRITE unit when first connecting so the SUT knows what RITE device it is “talking to”.

Calibrating the pressure transducers prior to putting PressuRITE into service is critical because the procedure “matches” the transducers to that specific controller AND compensates for the atmospheric pressure at the controller site before the sensors are installed to insure complete accuracy. The transducers can be removed and used on a different PressuRITE but should be re-calibrated prior to using again.

PressuRITE will last indefinitely. Projected life-cycle is 10+ years.

It is impossible for the PressuRITE controller itself to leak refrigerant as no “gas” ever comes directly into contact with it.  The pressure transducers are fabricated from solid brass or steel alloy “billets” that are not screwed or bayoneted together… so there are no seams to leak or burst. The electronics inside are “machine pressed and sealed” with high pressure O-Rings.  No leaks of our transducers have ever occurred.

More cycle frequencies, greater defrost duration choices and EXTREME flexibility for annual scheduling. Special days and holiday features make TimeRITE much more capable than any other defrost clock available.

Yes… because TimeRITE is so flexible, it can be used for anything from landscape to lighting… refrigeration to A/C time functions… or any time-based operation you can think of.

Because TimeRITE has “calendar capability”, a school district, for example, can schedule its entire year with all of the non-occupied “out of session” days, holidays, weekends and extended vacations and reduce the number of defrost cycles for those days. This adds up to a very significant energy savings district-wide for every school district that implements TimeRITE… tens of thousands of dollars can be saved annually… or more.

All RITE products, including TimeRITE, can be “linked” on any existing office network system such as PCs use, or their own separate network system. This allows access remotely via any PC or cell phone that can access the WEB.

TimeRITE has all the standard functions any existing old-style mechanical or electronic defrost clock has plus: 365 day annual schedule functionality, increased cycle and duration flexibility, compressor Enable/Disable function, total unit control (temperature-based) & network-communication capability.

TimeRITE is designed to handle only one refrigeration defrost system.

One of the great features & benefits of using TimeRITE for school districts is that once the year’s schedule is programmed, every subsequent year is automatically “recalendarized” to adjust for holiday date-shifts and lunar movement in our calendar.

One of the great features & benefits of using TimeRITE for school districts is that once the year’s schedule is programmed, every subsequent year is automatically “re-calendarized” to adjust for holiday date-shifts and lunar movement in our calendar.

TimeRITE installs as easily as any old-style defrost clock. It is programmed in advance, so after it’s installed and upon power-up, no more adjustment is needed.

Yes… TimeRITE IS VERY Accurate AND it has memory back-up via an on-board circuit-planted battery chip that will hold enough power to maintain the program in memory indefinitely.